+Is it as tough as plain concrete?
Yes. It is the same structural slab, same base and reinforcing underneath. The stamping and colour only change the surface, and a sealed stamped slab handles vehicle and foot traffic the same as any other finish.
+Does it get slippery when wet?
The stamp texture itself gives grip, and we vary how deep that texture is depending on the location. A steep driveway gets more texture than a covered patio, and sealer choice affects slip resistance too.
+How does the colour work?
Usually two layers. A base colour through the mix or broadcast as a hardener, then a contrasting release colour dusted on before stamping that settles into the texture lines, giving real depth instead of one flat tone.
+Will it crack?
All concrete can crack underneath. We cut control joints along pattern lines where possible so movement follows a grout line rather than running across a panel, which is far less noticeable than on a plain slab.
+How often does it need resealing?
Every three to five years for a driveway, longer for a sheltered patio. Resealing stops the colour fading and refreshes grip, and is a much smaller job than the original pour.
+Can you stamp my existing driveway?
No, stamping only works on fresh concrete while it is still plastic. An existing slab can be resurfaced with a stampable overlay instead, a different product, ask us about it if that is the goal.
+How is it different from pavers?
One solid poured slab, no joints for weeds, ants or sinking pavers to loosen. It also usually costs less than a quality paver job for the same area while giving a similar stone or brick look.
+How long does it take?
Two to four days on site, similar to a plain driveway. Stamping happens on pour day while the concrete is workable, then release agent gets cleaned off and it is sealed once cured.
